|
USE
-
TOTAL QUARTZ INEO ECS is a lubricant special Fuel Economy of second generation: it can be used for all Diesel engines (former and new generations). It is also appropriate for the majority of the Gasoline engines (consult the maintenance manual of the vehicle before use).
-
TOTAL QUARTZ INEO ECS is essential for the correct functionnement of the diesel particulate filter, as for the other systems of postprocessing.
-
TOTAL QUARTZ INEO ECS satisfies the most severe cycles of maintenance and in the most difficult conditions of use (motorway, intense urban circulation...), all seasons.
|
PERFORMANCES
|
Specifications
|
ACEA 2007 C2 & A5/B5
|
|
OEMS homologations
|
QUARTZ INEO ECS is the only low SAPS oil recommended by PEUGEOT and CITROEN.
NORM PSA PEUGEOT & CITROEN B71 2290
|
CLIENTS BENEFITS
|
Increase longévity the particulate filters
|
Reinforces the action of the particulate filter and prolongs its lifespan, by avoiding its early filling (50% less of metal components than traditional technology oil).
|
|
Fuel savings
|
Fuel savings: up to 6 % of fuel avings in starting phase, on average 3.5 % of fuel savings in mixed cycle compared to the use of an ACEA reference oil (tests carried out on a Citroen C4 1.6 HDi).
|
|
Respect of the environment
|
"ECS_Emission System Control": reduction of the CO2 emissions and the pollutant emissions. In addition to the beneficial effects on the effectiveness of the dieslel particulate filter, the fall of the fuel consumption leads to decrease the CO2 emissions, the low rate of phosphorus reinforces the effectiveness of the catalytic pots, EGR valve is less clogged, thus the Nox emissions can be better controlled.
|
|
Protection and optimal cleanliness of the engine
|
Thanks to immediate lubrication, to the detergent and dispersive additivation which ensures a remarkable cleanliness of the engine, QUARTZ INEO ECS has been developed to follow the most severe cycles of maintenance PSA.
|
CHARACTERISTICS
|
QUARTZ INEO ECS 5W-30
|
Units |
SAE grade 5W-30
|
| Sulphated ash content |
% |
0.69 |
| Phosphorus rate |
ppm |
800 |
| Sulphur rate |
% pds |
0.25 |
| Volumetric mass at 15°C |
kg/m3 |
853,6 |
| Viscosity at 40°C |
mm²/s |
63,48 |
| Viscosity at 100°C |
mm²/s |
10,60 |
| Viscosity index |
- |
157 |
| Flash Point Cleveland |
°C |
234 |
| Pour point |
°C |
-36 |
Download the product's technical sheet
Sheet updated : 01/09
Sticker reference: MPC /01/09
This lubricant used according to our recommendations and for the application for which it is planned does not present a particular risk. A card of data of safety in conformity with the legislation in force in the E.C. is available near your commercial adviser.
|
